TEMAC CNC Tenoner for Windows and Doors

TEMAC CNC Tenoner for Wood Windows and Doors
  • High capacity 330mm CNC controlled spindle changes tools in seconds, eliminating tool change downtime.

  • Integrated cutoff saw with automated referencing improves production speed and cut accuracy.

  • Ideal equipment for a lean window and door production environment alongside existing profiling machinery.

 

The TEMAC tenoning machine is ideal for small workshops where it is necessary to perform different tenons with multiple tools. It can be combined with a profiling machine or a Shaper to complete a simple work center.

  • TEMAC E – a heavy tenoner with full electronically controlled set-up of the spindle, cut-off saw and fence. The machine is controlled by an industrial PC that can interface to our WinCreator software.

  • TEMAC M – a heavy tenoner that allows the main tenoning unit to be set to 1 of 3 working heights; it has a manually operated cut-off saw and a tenoning fence with a motorised table. The machine is controlled by an industrial PC that can interface to our WinCreator software.

Cutting Diagram of TEMAC CNC Tenoner's High Capacity Tenoning Spindle
  1. Tenoning tools for TEMAC E with programmed positions and split working 
  2. Tenoning tools for TEMAC M with fixed working positions

TEMAC M

Temac M CNC Tenoner for Wood Windows and Doors

The base of the tenoning machine is constructed from heavy rib structured steel to obtain a solid compact machine which is rigid and highly resistant to heavy loads and stress. The cut off saw is pneumatically positioned to 1 of 4 positions. The tenoning head is driven by a 10HP motor, the 330 mm long shaft can carry 3 tools which can be set vertically in 3 positions by means of pneumatic pistons sliding on precise linear bearings with the help of a balancing pneumatic piston. 
The tenoning carriage moves on linear bearings with variable speed controlled by an inverter drive. The tenoning fence can swivel up to 45°, swivel angle is displayed on the monitor. Two horizontal positioning stops are provided with mechanical readout for timbers up to 2900 mm in length.


TEMAC is controlled by a BECKOHOFF industrial PC with a 7“ touch screen running a Windows Embedded operating system. The machine can be operated in manual mode or automatically using downloaded data from an offline application such as WinCreator.


The industrial performance of the machine offers easy operation and maintenance. All units are connected to a central lubricating system.

TEMAC E

With the TEMAC E the operator is given additional flexibility over the control of the machine with fully programmable positioning of the tenoning head, cut-off saw and tenoning fence.

Interior of TEMAC CNC Tenoner displaying automatic material cut-off saw and high capacity spindle

Configuration of the machine

Diagram of TEMAC CNC Tenoner's integrated-off saw and tenoning spindle

Using a special sequence for tenon creation produces tear-free stormproofed sashes

Illustration of TEMAC CNC Tenoner Climb Cut Reverse
CRAFTER CNC Profiling & Tenoning Center Window Joinery with Anti-Tearout Design

* indicates required